46
4 FUNCTIONS
4.2 Built-In Program Selection Function
8 9 Connect I0/I1 and I4/I5 in dual-channel, and link them to logic path A
using AND logic as the trigger of a bypass function.
(1) Connect logic path A with bypass
9 9 When both INPUT A and INPUT B are set to '9', a configuration error
will occur.
9 1 Connect eight inputs in single-channel, and link them to logic path B of
an FX5-SF-MU4T5 using AND logic.
(1) Connect logic path B with AND link
9 2 to 6 Connect eight inputs in dual channel, and link them to logic path B of
an FX5-SF-MU4T5 using AND logic.
(1) Connect logic path B with AND link
Rotary switch
(INPUT A)
Rotary switch
(INPUT B)
Description Program overview
(1)
I0 I1 I2 I3
I4 I5 I6 I7
(1)
I0 I1 I2 I3
I4 I5 I6 I7
(1)
I0 I1 I2 I3
I4 I5 I6 I7
To Next Page
Loading...
