SICK MPS-G

12 Technical data
Table 13: Technical data
Cylinder type C-slot
Detection zone 0 ... 50mm
1)
Supply voltage U
B
10 ... 30V DC
Power consumption ≤550mW
Required magnetic field strength, typ. ≥ 2mT
overrun distance can be configured
Hysteresis can be configured
Time delay before availability 0.15s
Resolution typ. 0.01mm
Linearity typ. 0.3mm
2)
Repeatability (response time) typ. 0.05mm
3)
Sampling rate min. 2kHz
IO-Link 1.1
Enclosure rating IP67
Protection class III
Circuit protection A, B, D
4)
Ambient temperature, operation –20°C ... +70°C
1)
Deviations are possible depending on the drive.
2)
At 25°C, the linearity error (maximum deviation) depends on response curve and minimum deviation
function.
3)
At 25°C, repeatability with magnet movement from one direction.
4)
A = UB connections reverse polarity protected
B = Inputs and outputs reverse polarity protected
C = Interference suppression
D = Outputs overcurrent and short-circuit protected
TECHNICAL DATA 12
8028195/2022-11-30 | SICK O P E R A T I N G I N S T R U C T I O N S | MPS-G with 2/3 switching points and IO-Link (up to 8 switching points)
51
Subject to change without notice