2 © SICK AG · Germany · All rights reserved · Subject to change without notice
8013889/ZML0/2017-06-09
SoftwareStand
Operating Instructions
NAV350 Laser positioning sensor
Software version described
Software access to the NAV350 is password protected. The default factory setting for the
password is as follows:
The NAV350 laser positioning sensor is intended for use in industrial environments. When
used in residential areas, it can cause radio interferences.
Software/tool Function Status
NAV350 Firmware V 1.06
Device description NAV350 Device specific software module
for SOPAS ET
V 1.000 or higher
SOPAS ET Configuration software V 02.38 or higher
User level Password
Authorised client client
Copyright
Copyright © 2016
SICK AG Waldkirch
Auto Ident, Reute Plant
Nimburger Straße 11
79276 Reute
Germany
Trademarks
Windows 2000™, Windows XP™, Windows Vista™ and Windows 7™ are registered trade-
marks of Microsoft Corporation in the USA and other countries.
Adobe
®
Reader™ is a trademark of Adobe Systems Incorporated.
Version of the operating instructions
The latest version of these operating instructions can be obtained as PDF at www.sick.com.