Table 5: Overview of product features and functions of the device
Product feature/func‐
tion
Characteristic
Security and ease of
use
•
Rugged, compact metal housing, CE marking (Europe)
•
Automatic self-test at system start
•
Diagnostic tools for device setup and (remote) device monitoring
•
Configurable output of the read results including read diagnostics
data in two output formats
•
Operating data polling and, in the event of an error, output of codi‐
fied error messages on request
•
Activatable test string function (heartbeat) to signal that the device
is ready for operation
•
Future-proof due to firmware update via data interface
•
Future-proof SOPAS ET configuration software with password-pro‐
tected configuration mode
•
SICK AppSpace ready: The device already includes sensor apps for
integrating it into existing communication networks
•
Low power consumption
•
Wide supply voltage range
•
Large ambient temperature range. For details, see "Technical data",
page 82
•
Parameter cloning (to back up the configuration data in the internal
device memory):
°
Externally by inserting a microSD memory card
1)
into the device
°
Externally via the CMC600 parameter cloning module
1)
in the
CDB
1)
or CDM
1)
connection module (function not supported for
RFU62x-105x)
Convenient operation/
configuration
•
Configuration (online/offline) using the SOPAS ET configuration soft‐
ware
•
Single Tag ID Wizard (assistant) to help with initial configuration
•
Configuration and starting of device functions via a web server or
command strings
•
Optional function blocks for easier integration into PLC programs
•
PROFINET single port (RFU62x-101xx, RFU62x-105xx): Configura‐
tion via GSD parameterization
•
Application-specific programming using the SICK AppStudio devel‐
opment environment.
Further information on this is available online at: www.sick.com/
SICK_AppStudio
•
Status and process feedback indicators via LEDs
Reading Operation
Mode
•
Start/stop operation: For reading one or more transponders during
a read cycle.
Read cycle
•
Read cycle start condition is configurable in the object trigger con‐
trol settings: switching inputs etc.
•
Read cycle stop condition is configurable in the object trigger con‐
trol settings: switching inputs etc.
Radio interface(s)
•
Internal antenna
Transponder Process‐
ing
•
Base model RFU620 supports all standard passive transponders
that are compatible with EPCglobal UHF Class 1 Generation 2 or
ISO/IEC-18000-6C
•
Reading, writing, and multiple overwriting of the data on the
transponders, depending on the application
•
The data-supplying device is a component of a system for complete
visualization of the data within the process chain
Transponder Manage‐
ment
•
Decoding of the UII in HEX, BIN and ASCII. Supports GS1 TDS and
other industry-specific standards such as VDA55xx.
PRODUCT DESCRIPTION 3
8015930/ZTM0/2018-11-06 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU62x
21
Subject to change without notice
To Next Page
Loading...
