RFU65x-101xx
PROFIBUS
2)
Via external fieldbus module CDF600-21xx
4)
to PROFIBUS
(RS-485) for data output (read result)
USB
3)
Aux (USB 2.0) for service
1)
Digital switching inputs 2 x physical. Optional 2 x additional external logical inputs (soft‐
ware-controlled) via module CMC600
4)
in the CDB
4)
or CDM con‐
nection module
4)
V
in
= max. 30 V, I
in
= max. 5 mA
Opto-decoupled, reverse polarity protected, adjustable debounce
time
Digital switching outputs 2 x physical. Optional 2 x additional external logical outputs (soft‐
ware-controlled) via module CMC600
4)
in the CDB
4)
or CDM con‐
nection module
4)
V
out
= V
S
– 1.5 V, I
out
≤ 100 mA (typical)
Short-circuit protected, temperature protected, not electrically iso‐
lated from the supply voltage
Antenna Sending/Receiving
1 x internal
Optical indicators 7 x RGB LEDs (status indicators) on front top
1 x RGB LED (process feedback) in front center Display function
can be set with pre-defined color assignment
5)
.
Acoustic indicator Beeper (buzzer), can be deactivated
Function for event signaling and volume adjustable
5)
Operating elements 2 x pushbuttons (select and start/stop functions)
Configuration SOPAS ET configuration software, CoLa commands (telegrams),
web server, fieldbus controller (PLC) with additional support by
SICK function blocks
Programming Application-specific programming with SICK AppStudio
6)
develop‐
ment environment.
You can find further information on the Internet at:
www.sick.com/SICK_AppStudio
1)
For example: Configuration, diagnosis, transponder access or display of the read results.
2)
Function blocks for various PLC manufacturers are available online at: www.sick.com/RFU65x.
3)
USB interface only for temporary use (service)
4)
Optional accessories.
5)
e.g. with SOPAS ET configuration software.
6)
Functions can be enabled with the SDK6U SD card. Available at: www.sick.com.
12.2.3 Mechanics and electronics
Table 32: Technical data for RFU65x: Mechanics/electronics
RFU65x-101xx
Electrical connection 1 x male connector, M12, 17-pin, A-coded
1 x female connector, M12, 4-pin, D-coded
1 female connector, USB, 5-pin, Micro B type
Supply voltage V
S
SELV in accordance with currently applicable standard EN
60950-1.
DC 18 V ... 30 V
1)
2)
DC 12 ... 30 V optional
3)
UL-certified devices require a supply voltage in accordance with
SELV - LPS according to UL/IEC/EN60950-1 or class 2 according
to NEC, UL1310.
Power consumption Operation: 20 W typical
4)
Maximum 26 W
5)
Standby: 6 W typical
TECHNICAL DATA 12
8014335/ZTL9/2018-10-14 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU63x, RFU65x
95
Subject to change without notice
To Next Page
Loading...
