SICK RFU62 Series

To Next Page

To Previous Page

Table 36: Signal assignment of adapter cable with open end

Pin Signal Function Wire color / charac‐

ters

1 – Shield Gray

2 V

Supply voltage Red +

3 GND Ground Blue –

4 – – –

5 – – –

14.4.3 CDB650-204 or CDM420-0006 to CAN network connection module

Adapter cable

Part no. 6021166 (5 m), unshielded

Ambient temperature range:

For fixed installation: –40 °C to +70 °C, for mobile installation: –20 °C to +70 °C

1 2

Figure 43: Adapter cable, part no. 6021166 (5 m) for connecting the connection module to the

CAN network

Female connector, M12, 5-pin, A-coded (view from front)

Illustration may differ

Table 37: Pin, signal and wire color assignments for the adapter cable with open end

Pin Signal Function Wire color

1 – Shield –

2 V

Supply voltage Red

3 GND Ground Black

4 CAN H CAN bus (IN/OUT) White

5 CAN L CAN bus (IN/OUT) Blue

14.4.4 Host interface RS-232 via CDB/CDM connection module to host (PC)

Device Connection module

RFU63x CDB650-204, CDM420-0006, -0007

RFU65x CDB650-204, CDM420-0006, -0007

Adapter cable

Part no. 2020319 (3 m), unshielded

Ambient temperature range:

For mobile installation: –5 °C to +90 °C, for fixed installation: –30 °C to +90 °C

ANNEX 14

8014335/ZTL9/2018-10-14 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU63x, RFU65x

101

Subject to change without notice

Other manuals for SICK RFU62 Series