SICK RFU62 Series

For RFU62x-104xx (serial variant)
Ambient temperature range: 0 °C to +80 °C
The shield braid of the cable has contact with the metal housing of the female connec‐
tor.
ð
110
15
6
11
5
1 2
Figure 40: Adapter cable, part no. 2043413
1
Female connector, D-Sub-HD, 15-pin (view from front)
2
Illustration may differ
Table 32: Signal assignment of adapter cable with open end
Pin Signal Function Wire color
1 U
V
Supply voltage Red
2 RxD (RS-232), AUX Aux interface (receiver) Violet
3 TxD (RS-232), Aux Aux interface (sender) Yellow
4 Sensor 2 Digital switching input 2 Red-black
5 GND Ground Black
6 RD+ (RS-422/485), host Host interface (receiver+) Light blue
7 RD– (RS-422/485), host
RxD (RS-232), host
Host interface (receiver–) Blue
8 TD+ (RS-422/485), host Host interface (sender+) Light-gray or
turquoise
9 TD– (RS-422/485), host
TxD (RS-232), host
Host interface (sender-) Green
10 CAN H CAN bus (IN/OUT) Gray
11 CAN L CAN bus (IN/OUT) Pink
12 Result 1 Digital switching output 1 Brown
13 Result 2 Digital switching output 2 Orange
14 Sensor 1 Digital switching input 1 White
15 SensGND Switching input ground White-black
14.4.6 RFU620-101xx (Ethernet variant)/RFU620-104xx (serial variant): CDB6xx or CDM420 to CAN net‐
work connection module
Adapter cable
Part no. 6021166 (5 m), unshielded
Ambient temperature range:
For fixed installation: –40 °C to +70 °C, for mobile installation: –20 °C to +70 °C
14 ANNEX
92
O P E R A T I N G I N S T R U C T I O N S | RFU62x 8015930/ZTM0/2018-11-06 | SICK
Subject to change without notice