SICK TriSpector1000

The parameter Errorcode contains error information generated by the Siemens TRCV
function block that is forwarded through the TriSpector1000 Result Output function
block. For interpretation of the TRCV error codes, refer to the TCON help in the Siemens
help system.
Error codes of the TriSpector1000 Result Output function block:
Error code Short description Description
16#0000_0000 No Error No Error
16#0001_0000 Invalid telegram length
(<STX> or <ETX> is missing)
Data sent from the Trispector
contains too many bytes.
Default is maximum 100 bytes,
if sending more data the array
size needs to be increased, see
chapter 6.5. Could also be that
<STX> or <ETX> char is miss‐
ing in start/end of string.
16#0000_XXXX TRCV Error Please use the help system of
the TIA portal to interpret the
error code
APPENDIX 12
8021808/12ID/2019-01 | SICK O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
101
Subject to change without notice