10.6 Output switching levels
Attribute Value
Voltage level high High: > Voltage Supply - 3.0 V
(Voltage Supply = 19.2 V...28.8 V)
Low: < 2.0 V
Source/sink output current ≤ 100 mA at 24°C
Overcurrent protection < 200 mA
Capacitive load ≤ 100 nF
Inductive load ≤ 1H (with use of external free-wheeling diode,
otherwise permanent damage to the device
can occur)
10.7 Performance
Attribute Value
Typical height resolution (Near field/Far field) 1008: 20/50 μm
1030: 40/280 μm
1060: 80/670 μm
Maximum performance 2000 3D profiles/s
Maximum number of profiles 2500 per image
3D profile resolution 1008: 0.049 mm/px
1030: 0.215 mm/px
1060: 0.43 mm/px
TECHNICAL DATA 10
8021808/12ID/2019-01 | SICK O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
63
Subject to change without notice
To Next Page
Loading...
