SICK TriSpector1000

7.2.1 Menus
Three menus are available in the SOPAS ET functions panel: the Device menu, the Para‐
meter menu and the Functions menu.
Device menu
Go online Establish a connection between SOPAS ET and the TriSpec‐
tor1000.
Go offline Switch the connection mode to offline. In this mode, parameter
values cannot be written to the device and measurements cannot
be monitored. The connection information in SOPAS ET remains
intact.
Switch to physical device Switch from the emulator to the TriSpector1000 and import the
configuration. This option is only enabled when running the emula‐
tor. For details, see "Copying a configuration from the emulator",
page 56.
Switch to simulated device Switch from the TriSpector1000 to the emulator. For details, see
"Starting the emulator", page 54.
Login... Log in to the device at a certain user level. When a device is added
to a SOPAS project, the user level is automatically set to Authorized
Client, which is the required level for saving parameter values to
the device. The current user level is shown below the image area.
Logout Cancel the login. Once the user has logged out, parameters
secured by the user level can no longer be changed.
Import... Import a saved device configuration from a PC. For details,
see "Exporting and importing data", page 56.
Export... Export the current device configuration to a PC. For details,
see "Exporting and importing data", page 56.
Create PDF Create a PDF which includes device parameters and their values.
Properties Open the Device Settings window.
Close Close the SOPAS ET device window.
Parameter menu
Write to device Write the configuration saved in the SOPAS project to the device.
Read from device Read the configuration from the device and saves it in the SOPAS
project.
Save permanent Save the configuration in the device flash memory and to the
microSD memory card (when applicable).
Functions menu
Load factory defaults Reset all SOPAS ET parameters including IP address.
Load application defaults Reset all SOPAS ET parameters except IP address.
Save image to file Save the current image to disk.
Image recording Save multiple images to disk. For details, see "Recording images",
page 32.
7.2.2 Image handling controls
Use the image handling controls to manipulate regions and perspective when viewing
images. As an alternative to the buttons, you can use a mouse with a scroll wheel, as
described below.
7 OPERATION
24
O P E R A T I N G I N S T R U C T I O N S | TriSpector1000 8021808/12ID/2019-01 | SICK
Subject to change without notice