SICK TriSpector1000

Image area Tool symbol
(parameter
pane)
Tool result
section
(parameter
pane)
Description
Not found Result not found.
Neutral Result neutral (no tolerances set).
7.7.3 Decision model
The SOPAS ET decision model applies tool tolerances to define binary results. If multi‐
ple tools are used, the tool results are combined for the overall image decision (AND
logic).
The priority for a decision is:
1 'Not Found' (one or more tool results are 'Not Found')
2 'Invalid' (one or more tool results are 'Invalid')
3 'Not OK' (one or more tool results are 'Not OK')
4 'OK' (all tool results are 'OK')
5 'Neutral' (no tool tolerances are set)
NOTE
Only 'OK' and 'Not OK' can be sent as overall decisions to the digital outputs. Other
result types can be handled by conditions, see "Condition examples", page 44.
7.7.4 Conditions
In the Conditions section, the results from the Task workflow step are used to create
true/false expressions.
"Condition examples", page 44 and "Handling arrays by conditions", page 45 con‐
tain examples of conditions for mathematical operations, result checks and array han‐
dling. Use the results as digital output, for creation of result strings or as input to other
conditions.
Creating a condition
Figure 35: Creating a condition
1. Click the New button and name the condition.
2. Edit the condition in the condition editor, either by typing or by inserting parame‐
ters from the +Result and +Func lists.
■
The +Result list contains image analysis results and tool result output.
■
The +Func list contains supported functions and operators.
7.7.4.1 Condition examples
7 OPERATION
44
O P E R A T I N G I N S T R U C T I O N S | TriSpector1000 8021808/12ID/2019-01 | SICK
Subject to change without notice