SICK TriSpector1000

Define the output string in the Ethernet output string section in the Results workflow step,
see "Ethernet output string", page 46 for details.
To send the output string via TCP/IP:
1. Select the Output string checkbox in the Ethernet section in the parameter pane.
2. In the Server/client drop-down menu, select to act as server or client (depending on
the settings of the connected device).
3. Set the port number in the TCP Port text field. 2114 is the default port.
To send the output string via the serial interface:
1. Select the Output string checkbox in the Serial section in the parameter pane.
7.8.4 Logging images to an FTP server
To log images to an FTP server:
1. Select the FTP image logging checkbox in the Ethernet section in the parameter pane.
2. Specify the IP address, port, username and password to connect to an FTP server.
3. Test the connection to the server by clicking the Test connection button.
✓
A message with the connection status appears in the GUI.
4. Specify the log condition in the Image logging section in the Results workflow step,
see "Image logging", page 47.
The logged images are saved in Portable Network Graphics (.png) format, and contain
both height data and reflectance data.
Destination folder
If the Path field in the FTP image logging section is empty, images are saved to the speci‐
fied folder on the FTP server. To create a sub-folder and save the images there, define
the path to the sub-folder in the Path field.
7.8.5 Enabling the web interface
Enable the Webserver option to view the images acquired by the TriSpector1000 in a web
browser. Google Chrome is recommended as web browser due to advanced support of
WebGL and web sockets.
NOTE
In order to access the web interface, the computer and the TriSpector1000 must be on
the same subnet.
To view images in a web browser:
1. Select the Webserver checkbox in the Ethernet section in the parameter pane.
2. Open a web browser window.
3. Type the IP address of the TriSpector1000 in the address field.
The page displayed in the web browser views the live 3D image, the name of the current
job, the image number, the results for all applied tools and the overall image decision.
Use the eye symbol above the image area to show the applied tools as overlay to the
image.
NOTE
If the error message 'Webserver not enabled' appears in the web browser, it means that
the Webserver checkbox in SOPAS is not selected.
OPERATION 7
8021808/12ID/2019-01 | SICK O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
51
Subject to change without notice