Button Name Description
Select Click and drag to change the size and position of the image.
Shortcut command: Ctrl+Q.
Move Click and drag to move the image.
Shortcut command: Ctrl+W.
Shift+ press and hold the mouse scroll wheel.
Rotate Click and drag to rotate the image.
Shortcut command: Ctrl+E.
Press and hold the mouse scroll wheel.
Zoom Click and drag upwards to zoom in and downwards to zoom out.
Shortcut command: Ctrl+R.
Rotate the mouse scroll wheel.
3D navigation control
Use the 3D navigation control in the lower left corner of the image viewer to switch
between different viewing angles:
•
Click an arrowhead (X, Y or Z) to view a 2D projection of the object.
•
Click the same arrowhead twice to flip the 2D projection (for example, to switch
between the top and bottom view for the Z-axis).
•
Press Home to restore the original viewing position.
Figure 12: 3D navigation control
7.2.3 Image view modes
The following view modes are available:
View mode Description Example
Reflectance Color is proportional to the
reflectance values along the
laser line.
Suitable to show the surface
details of an object, such as a
print.
Figure 13: Reflectance view mode
Reflectance
(Hybrid)
Color is proportional to depth (z-
coordinate), color brightness is
proportional to the laser
reflectance.
Suitable to show large variations
in depth together with surface
details.
Figure 14: Reflectance (Hybrid) view mode
OPERATION 7
8021808/12ID/2019-01 | SICK O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
25
Subject to change without notice
To Next Page
Loading...
