For more information see the TIA Portal help system.
12.6.4.2 Import the TriSpector1000 Test Function Block
To get the generated blocks into your PLC project, the “TrispectorTest_FB.scl” file must be
imported as an external source file (“Add new external file”).
To use the block, it is necessary to generate it first from the source file. Right mouse
click on the SCL-File -> Generate blocks from source.
APPENDIX
12
8021808/12ID/2019-01 | SICK O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
89
Subject to change without notice
To Next Page
Loading...
