SICK V200 - Page 63

To Next Page

To Previous Page

Operating Instructions Chapter 13

V200/V300

Subject to change without notice

Annex

Fig. 16: Correct arrangement of the reflective tapes at joints .........................................29

Fig. 17: Permissible divergence of the reflective tape from the optical axis of the

camera as a function of the distance at 20 mm resolution................................29

Fig. 18: Permissible divergence of the reflective tape from the optical axis of the

camera as a function of the distance at 24 mm resolution................................30

Fig. 19: Permissible divergence of the reflective tape from the optical axis of the

camera as a function of the distance at 30 mm resolution................................30

Fig. 20: System connection V200/V300 .........................................................................32

Fig. 21: Connecting the V200/V300 without external device monitoring (EDM),

without internal restart interlock and without external key-operated

pushbutton for teach-in ......................................................................................33

Fig. 22: Connecting the V200/V300 with external device monitoring (EDM), with

internal restart interlock and with external key-operated pushbutton for

teach-in...............................................................................................................33

Fig. 23: Connection of two V200/V300 with synchronisation .........................................35

Fig. 24: Connection diagram V200/V300 at UE410 Flexi ...............................................36

Fig. 25: Connection diagram V200/V300 at UE10-3OS..................................................37

Fig. 26: Application with small protective field (1 × V200/V300)....................................38

Fig. 27: Application with large protective field (2 × V200/V300) ....................................39

Fig. 28: Ergonomic workplace design due to the use of two V200/V300........................40

Fig. 29: Mounting with automatic material transport into the workstation......................41

Fig. 30: Daily test of the protective device with the test rod............................................43

Fig. 31: Dimensional drawing V200/V300 (mm).............................................................56

Fig. 32: Dimensional drawing, mounting kit (mm)...........................................................57

Related product manuals