Teach-in
2 s
–
+
Application specific configuration
–
+
2 s
1.1 1-point Teach-in
1.2 2-point Teach-in
1.3 Auto Teach-in
1.4 Zone Teach-in
1.5 Teach-in of transparent objects
End End teach mode
2.1 Switching mode
2.2 Response time
2.3 Time delay setting
2.4 Expert menu/detailed settings
2.5 Reset
End back to operating mode
3.1 Set display value to zero
3.2 Display settings
3.3 Energy-saving mode
3.4 Reverse display
3.5 Hysteresis setting
3.6 External input configuration
3.7 Copy mode
3.8 Master Teach-in
3.9 ASC setting
3.10 Power setting of the sender LED
3.11 Keylock
End back to Expert menu
P. 6
P. 7
P. 8
P. 9
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
Selection of the menu levels
To Next Page
Loading...