Safety information
1.2 Safety and application instructions
A5E00215731A AD
8 Siemens AG Operating Instructions 2.02 1PL618
Qualified personnel
These operating instructions only contain the information that is necessary for the machines
to be used by qualified personnel in accordance with their intended purpose.
Those responsible for plant safety must ensure the following:
● The basic planning work for the system and all work relating to transportation, assembly,
installation, commissioning, maintenance and repairs is carried out by qualified personnel
and checked by responsible, suitably skilled personnel.
● The operating instructions and machine documentation are always available.
● The technical data and specifications relating to installation, connection, ambient and
operating conditions are taken into account at all times.
● The system-specific installation and safety regulations are observed.
● Personal protective equipment is used.
● Work on or in the vicinity of these machines by unqualified persons is prohibited.
● If the machines are used outside industrial areas, the installation site must be
safeguarded against unauthorized access by means of suitable protection facilities (e.g.,
safety gates) and appropriate warning signs.
These operating instructions therefore only contain the information which is necessary for
the machines to be used by qualified persons in accordance with their intended purpose.
Note
Siemens Service Center
We recommend engaging the support and services of your local Siemens Service Center for
all planning, installation, commissioning, and maintenance work.
[ID 2.02]
See also
Siemens Service Center (Page 15)
To Next Page
Loading...
Need help?
General
