Siemens 1PL618 Series

Maintenance
7.3 Corrective Maintenance
A5E00215731A AD
Siemens AG Operating Instructions 2.02 1PL618
63
7.3.5 Replacing the sensor module
Only trained service engineers are authorized to replace the sensor module.
WARNING
Motor-specific sensor module
The Sensor Module contains motor-specific and sensor-specific data and an electronic
nameplate.
If you operate a different Sensor Module on the motor, this can result in serious injury or
death, or cause considerable material damage.
Only operate the sensor module on the original motor. Do not install the sensor module on
other motors. Do not replace the sensor module with a sensor module from a different
motor.
[ID 967.01]
See also
Siemens Service Center (Page 15)