A5E00215731A AD
Siemens AG Operating Instructions 2.02 1PL618
7
Safety information
1
1.1 Observing the five safety rules
For your personal safety and to prevent material damage when working on the device,
always observe the safety instructions on the product and the following five safety rules: You
must read the information provided in "Safety information".
The five safety rules:
1. isolate,
2. Protect against reconnection,
3. verify that the equipment is not live,
4. Ground and short circuit,
5. Cover or enclose adjacent components that are still live
Qualified personnel
Commissioning and operation of this machine are to be carried out by qualified personnel
only. For the purpose of the safety information in this Instruction Manual, a “qualified person”
is someone who is authorized to energize, ground, and tag equipment, systems, and circuits
in accordance with established safety procedures.
1.2 Safety and application instructions
The safe use of electrical machines
WARNING
Rotating or live parts
Rotating or live parts are dangerous.
Fatal or severe injuries and substantial material damage can occur if the required covers
are removed or if the machines are not handled, operated, or maintained properly.
Only remove covers in accordance with regulations and operate machines correctly.
Perform regular maintenance on the machine.
To Next Page
Loading...
