Maintenance
7.3 Corrective Maintenance
A5E00215731A AD
Siemens AG Operating Instructions 2.02 1PL618
57
7.3 Corrective Maintenance
7.3.1 Instructions for repair
Qualified personnel
Commissioning and operation of this machine should be carried out by qualified personnel
only. In the safety notes in this documentation, "qualified personnel" refers to those persons
who are authorized to commission, ground, and mark devices, systems, and circuits in
accordance with established safety procedures.
Safety notes
WARNING
Rotating or live parts
Rotating or live parts are dangerous. Death, serious injury, or material damage can result if
the required covers are removed or if the device is not operated properly.
Before starting work on the motor and, in particular, before opening the covers of live parts,
make sure that the motor or system is properly isolated.
WARNING
Proper transport
Only transport the motor in accordance with the transport guidelines. Death, serious injury,
or material damage can be the result of improper transport.
Whenever you have to transport the motor, follow the instructions provided in the section
entitled "Transport, storage".
[ID: 370.01]
See also
Transport, storage (Page 21)
Observing the five safety rules (Page 7)
7.3.2 Dismantling
Disassembly instructions
The drawings and parts lists do not contain any detailed information about the type and
dimensions of retaining elements and the like.
To Next Page
Loading...
