Internal control/status words
Function diagrams
2-549
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
2.6 Internal control/status words
Function diagrams
2501 – Control word, sequence control 2-550
2503 – Status word, sequence control 2-551
2505 – Control word, setpoint channel 2-552
2510 – Status word 1 (r0052) 2-553
2511 – Status word 2 (r0053) 2-554
2512 – Control word 1 (r0054) 2-555
2513 – Control word 2 (r0055) 2-556
2520 – Control word, speed controller 2-557
2522 – Status word, speed controller 2-558
2526 – Status word, closed-loop control 2-559
2530 – Status word, current control 2-560
2534 – Status word, monitoring functions 1 2-561
2536 – Status word, monitoring functions 2 2-562
2537 – Status word, monitoring functions 3 2-563
2546 – Control word, faults/alarms 2-564
2548 – Status word, faults/alarms 1 and 2 2-565
2634 – Sequence control - Missing enable signals 2-566
To Next Page
Loading...
Need help?
General