Siemens DP/AS-Interface Link 20E User Manual

Using the Command Interface
71
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
Table 3-3 Return Value in the Response Buffer, continued
STATUS Meaning
83A3H An AS-i slave with the new address already exists on the AS-Interface.
83A4H The AS-i slave address cannot be deleted.
83A5H The AS-i slave address cannot be set.
83A6H The AS-i slave address cannot be stored permanently.
83A7H Error reading the extended ID1 code.
83A8H The target address is not plausible (for example a B slave address was used for a
standard slave).
83B1H A length error has occurred transferring a string according to profile 7.4.
83B2H A protocol error has occurred transferring a string according to profile 7.4.
83F8H The job number or the job parameter is unknown.
83F9H The AS-i master has detected an EEPROM error.
Note
Errors that occur during processing of the acyclic services and that are indicated
by call parameters such as “Return Value” can be found in the documentation of
the relevant programming interface.

Siemens DP/AS-Interface Link 20E Specifications

General

Brand	Siemens
Model	DP/AS-Interface Link 20E
Category	Computer Hardware
Language	English