Using the Command Interface
83
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
3.3.2 Get_Permanent_Parameter
Purpose
With this call, a slave-specific parameter value stored on the EEPROM of the
DP/AS-i Link 20E is read.
Structure of the Job Data in the Send Buffer
Byte Meaning
0 Command number: 01
H
1 Slave address
Structure of the Response Data in the Receive Buffer
Byte Meaning
Bit 7 Bit 4 Bit 3 Bit 0
0 reserved configured parameters
To Next Page
Loading...
