Siemens et 200sp - Page 54

Configuring/address space
4.2 Pulse width modulation PWM mode
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 05/2019, A5E35061186-AB
53
Parameters of the TM Pulse 2x24V in "Pulse width modulation PWM" mode
The following table shows the parameters for the module.
The default settings of the parameters are shown in bold in the "Value range" column.
Table 4- 5 Adjustable parameters
Parameter
Value range
Scope
Channel configuration
1
•
2 channels (2 A)
• 1 channel (4 A)
Module
Reaction to CPU STOP
•
Output substitute value
• Continue operation
Channel
Substitute value for DQA
•
0
• 1
Channel
Substitute value for DQB
•
0
• 1
Channel
Group diagnostics
•
Deactivated
• Activated
Channel
Diagnostics DQA
•
Deactivated
• Activated
Channel
Diagnostics DQB
•
Deactivated
• Activated
Channel
High-speed output (0.1 A)
•
Deactivated
• Activated
Channel
Function DI
•
Input
• HW enable
Channel
Input delay for digital inputs
• None
• 0.05 ms
•
0.1 ms
• 0.4 ms
• 0.8 ms
• 1.6 ms
• 3.2 ms
• 12.8 ms
• 20 ms
Channel
Output format
• S7 analog output
•
1/100
• 1/1000
• 1/10000
Channel
Minimum pulse duration
0...85000000 μs
Channel