Siemens et 200sp - Page 89

Configuring/address space
4.4 On/Off delay mode
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
88 Manual, 05/2019, A5E35061186-AB
Parameters of the TM Pulse 2x24V in "On/Off delay" mode
The default settings of the parameters are shown in bold in the "Value range" column.
Table 4- 11 Adjustable parameters
Parameter
Value range
Scope
Channel configuration
1
•
2 channels (2 A)
•
1 channel (4 A)
Module
Reaction to CPU STOP
•
Output substitute value
• Continue operation
Channel
Substitute value for DQA
•
0
•
1
Channel
Substitute value for DQB
•
0
• 1
Channel
Group diagnostics
•
Deactivated
•
Activated
Channel
Diagnostics DQA
•
Deactivated
• Activated
Channel
Diagnostics DQB
•
Deactivated
•
Activated
Channel
High-speed output (0.1 A)
•
Deactivated
• Activated
Channel
Input delay for digital inputs
• None
• 0.05 ms
•
0.1 ms
• 0.4 ms
• 0.8 ms
• 1.6 ms
• 3.2 ms
• 12.8 ms
•
20 ms
Channel
Off delay for pulse output
0...85000000 μs
Channel
1
When configuring with HSP for STEP 7 or with a GSD file, you define the channel configuration by
the selection of the module name.
Note
PROFIBUS GSD configuration
When configuring with a PROFIBUS GSD file, the possible parameter assignments are not
available. The parameters are preassigned in the module with the default
setting. Set the
"On/Off delay" mode and the further parameters in the user program using data record 128.