Conducting calls – enhanced functions
65
Step by Step
Output on first line.
> < [ Confirm to select the next variable forwarding type.
or
> < To edit the current variable forwarding type, select the
required command.
Programming a forwarding destination
u Open the system menu.
> < [ Select and confirm the basic service.
> < [ Select the menu item and confirm.
[ Confirm. "VARY FORWARD" is displayed.
[ Confirm. "FIXED FORWARD" is displayed.
[ Confirm. "Forw. for internal" is displayed.
> < [ Select and confirm.
o Enter the phone number for the forwarding destination.
Any destination previously programmed will be over-
written.
[ Confirm when the complete number has been entered.
To select a different forwarding type, proceed as de-
scribed onÆ Page 64.
If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted ((for exception, see Æ Page 64). Fixed
forwarding is deactivated.
Deleting a forwarding destination
A variable forwarding destination is automatically delet-
ed when the forwarding type is deactivated.
Activating variable forwarding
Variable forwarding is automatically activated when the
forwarding destination is programmed.
Forw. for external
NEXT
BASIC SERVICE
DESTINATIONS
FORWARD
NEXT
NEXT
ENTER DESTIN.:
SAVE
To Next Page
Loading...
