Step by Step
Conducting calls – enhanced functions
66
Deactivating variable forwarding
You can deactivate all variable forwarding types in the
Service Menu (Basic Service).
u Call the system menu.
> < [Select and confirm the basic service.
> < [ Select the menu item and confirm.
[ Confirm. "VARY FORWARD" is displayed.
[ Confirm. "FIXED FORWARD" is displayed.
[ Confirm. "Forw. for internal" is displayed.
> < [ Select and confirm. Variable forwarding is deactivated
and the forwarding destination is deleted.
To select a different variable forwarding type, proceed
as described on Æ Page 64
Checking forwarding
To check up on the status of the forwarding types, pro-
ceed as described on Æ Page 64. The forwarding desti-
nation is shown in the second line if this variable for-
warding type is activated.
BASIC SERVICE
DESTINATIONS
FORWARD
NEXT
NEXT
DEACTIVATE
To Next Page
Loading...
