Virtual Network Services
A31003-W1040-U101-1-7619, July 2006 DRAFT
118 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsintro.fm
VNS global settings
To define DAS for VNS global settings:
1. From the main menu, click Virtual Network Configuration. The Virtual Network list
appears.
2. In the left pane, click Global Settings. The Authentication tab appears.
3. Click the DAS tab.
4. To enable DAS support, select the Enable DAS Support checkbox.
5. In the seconds box, type the replay protection time limit. The default value is 300.
6. To enable authorize-only service type, select the Enable Authorize-only service type
checkbox. By default, the Require Username attribute to identify a session checkbox is
selected.
7. To save your changes, click Save.
To define admission control thresholds for VNS global settings:
1. From the main menu, click Virtual Network Configuration. The Virtual Network list
appears.
2. In the left pane, click Global Settings. The Authentication tab appears.
3. Click the Wireless QoS tab.
To Next Page
Loading...
