Availability, mobility, and controller functionality
A31003-W1040-U101-1-7619, July 2006 DRAFT
200 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_controlleravailmobility.fm
Mobility manager
9. Select the Security Mode option:
● Allow all mobility agents to connect – All mobility agents can connect to the mobility
manager.
● Allow only approved mobility agents to connect – Only approved mobility agents
can connect to the mobility manager.
10. To save your changes, click Save.
To designate a mobility agent
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. In the left pane, click Mobility Manager. The Mobility Manager Settings screen appears.
3. To enable mobility for this controller, select the Enable Mobility checkbox. The controller
mobility options appear,
4. Select the This Wireless Controller is a Mobility Agent option. The mobility agent
options appear.
>
If you set up one HiPath Wireless Controller on the network as a mobility
manager, all other HiPath Wireless Controllers must be set up as mobility
agents.
To Next Page
Loading...
