Using the system
18
Building Technologies 009929_a_en_--.doc
Fire Safety & Security Products 11.2006
3.15 How to set time and date
The alarm system has an internal clock that may be used to automatically arm or
disarm the alarm or turn outputs on or off. It is also used to identify when events
have occurred in the memory via the LCD keypad.
Should you need to change the time & date, this must be done from the CLIENT mode.
3.15.1 Changing the day, time and date
Always enter the CLIENT mode first:
1. Press: <PROG>
2. Enter: Master/User Pin Code (default 147258)
3. Press <ENTER>
Î DISPLAY: Client: User
Changing the day:
1. Press <26>
2. <ENTER>
3. <2> <ENTER>
4. <1-7> <ENTER>
Î 1-7 = current day (1 = Sun, 2 = Mon to 7 = Sat)
Changing the time:
1. Press <26>
2. <ENTER>
3. <1> <ENTER>
4. <HHMM> <ENTER>
Î HH = Hour in 24-hour format and MM = minutes
Changing the date:
1. Press <26>
2. <ENTER>
3. <3> <ENTER>
4. <DDMMYY> <ENTER>
Î DD =1-31 current date, MM = months 1-12, YY = year 00-99
To Next Page
Loading...
