5-20 February 5, 2004 FFDM-S Service Manual
Upgrading the PXCM Software
NOTE: Typically, you will be upgrading an PXCM software only at the direction of Direct Radiography
Corp., or if you suspect that the current software is corrupt.
To upgrade the PXCM’s software:
1. Click the Software Upgrade link on the PXCM Control Panel page, or the
Upgrade link on any of the other PXCM pages.
The Upgrade PXCM Software page displays.
NOTE: For security purposes, you may be prompted to enter a login name and password before
executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.
2. For the Select the package to be upgraded option, select siemens.
3. Select whether you want to overwrite all of the PXCM configuration files.
If you select the Save reserved files option, specify the files you want to
protect from being overwritten in the Enter Configuration files to be
retained field.
To Next Page
Loading...
