Issue 03/01 Applicable Standards
MICROMASTER 411 & COMBIMASTER 411 Operating Instructions
6SE6400-5CA00-0BP0
155
Appendices
A Applicable Standards
European Low Voltage Directive
The MICROMASTER product range complies with the requirements of the Low
Voltage Directive 73/23/EEC as amended by Directive 98/68/EEC. The units
are certified for compliance with the following standards:
EN 60146-1-1 Semiconductor inverters – General requirements and line
commutated inverters
EN 60204-1 Safety of machinery – Electrical equipment of machines
European Machinery Directive
The MICROMASTER product range does not fall under the scope of the
Machinery Directive. However, the products have been fully evaluated for
compliance with the essential Health & Safety requirements of the directive
when used in a typical machine application. A Declaration of Incorporation is
available on request.
European EMC Directive
When installed according to the recommendations described in this manual,
the MICROMASTER product range fulfils all requirements of the EMC
Directive as defined by the EMC Product Standard for Power Drive Systems
EN61800-3.
ISO 14001
Siemens plc operates a quality and environmental management system, which
complies with the requirements of ISO 14001.
ISO 9001
Siemens plc operates a quality management system, which complies with the
requirements of ISO 9001.
To Next Page
Loading...
Need help?
General
