3 Commissioning Issue 03/01
MICROMASTER 411 & COMBIMASTER 411 Operating Instructions
44
6SE6400-5CA00-0BP0
3.2 General Information
For basic operation no additional equipment is required.
However, for more complex operation either the Basic Operator Panel (BOP),
Advanced Operator Panel (AOP) or the set-up software contained on the Docu-CD
is required.
The COMBIMASTER 411/MICROMASTER 411 can additionally be integrated into
automation systems via the PROFIBUS module (option) or USS interface.
When delivered the inverter has a frequency setpoint range of between 0 Hz and
50 Hz.
WARNING
The inverter does not have a power supply switch and is therefore live when the
power supply is connected.
To Next Page
Loading...
