Glossary
BW500 and BW500/L
Operating Instructions, 12/2016, A5E33482052-AD
209
An industry standard protocol used by popular SCADA and HMI systems.
A mA input function to incorporate moisture reading from an external moisture sensor.
Since every material has its own unique physical properties, and may impact differently, a span
calibration is required for each material to realize maximum accuracy.
Proportional Integral Derivative control is used to control the feed rate to a setpoint, either
internal to the BW500 or external.
Random Access Memory.
Memory that has both read and write capabilities.
An electromechanical device with contacts that can be closed or opened by energizing a coil.
Any operator initiated span calibration.
Any operator initiated zero calibration.
A value that the integrator is trying to match.
An interface to popular industrial communication systems.
To Next Page
Loading...
