MOBILETT Plus / - E/ - M SPR8-215.898.01 Page 26 of 28 Siemens-Elema AB
Rev. 05 01.02 SPS-UD Solna, Sweden
10 - 26 Mechanical systems
• Loosen the adjustment screw so that the arm is no longer balanced, however the spring
mechanism remains in position (Fig. 29). Do not allow the spring mechanism to fall out.
• Remove the screw and washer from the upper counter bearing (Fig. 30).
• Remove the friction linings.
Fig. 29 Fig. 30
To Next Page
Loading...
