MOBILETT Plus/ - E/ - M SPR8-215.898.01 Page 6 of 6 Siemens-Elema AB
Rev. 05 01.02 SPS-UD Solna, Sweden
8 - 6 Miscellaneous
• Pull out the cable and rewind it to bring the tension back to the cable winder spring.
Repeat that six times.
• Reinstall upper plate with distance ring, plastic role and Y-plate.
• Pull out the cable completely.
• Test cable winder and brake function.
• Reinstallation is performed in the reverse order.
Fig. 8
The cable winder should not rewind by itself.
The brake force is adjusted via right screw.
nut clockwise -> stronger (pos. 1 / Fig. 8).
nut counterclockwise -> softer.
MOB00620
1
To Next Page
Loading...
