18 Error messages of the imaging system
MOBILETT XP Digital SPR8-230.840.30.03.02 Siemens AG
12.05 CS SD 24
Page 18 of 68
Medical Solutions
Tab. 2 Customer Fatal Error Table
Error Code Error Message Remedy
-100 Detector Unit: Self Check Error:
Detected an Error.
• Touch OK and shut down the sys-
tem
• If Shutdown is displayed, touch it.
The system will automatically shut
down.
• If these errors occur, contact a Sie-
mens representative or distributor.
-101 Capture Board Self Check Error:
Detected Capture Board Error.
-102 Capture Device Open Error:
Failed to open capture device.
-103 READ Timeout Error: Failed to
transmit data.
-104 Requested I/O pending error:
Failed to access the device.
-105 CXDCAP.INI Open Error: Install
CXDCAP.INI file.
-106 Capture Board SelfCheck Error:
Detected Capture Board Error.
-107 Power Supply Error: Shuts down
after 10 seconds.
-522 File Open Error: <(File
name)>File not found.