Siemens optiPoint 410 S Series - Page 115

Appendix
115
|||---05=Call forwarding? Not supported
|||---07=Call duration? On
| | |--- 08=Call waiting? Not supported
|||---09=Call transfer? Not supported
| | |--- 10=Call join? On
|||---11=Contrast?
| | | |--- 1=Display? 2
||||2=Key labels? 2
||||---0=End?
| | |--- 12=Dialing mode?
||||---1=Name? Not supported
||||---2=Number?

| | | |--- 3=Name and Number? Not supported
||||---0=End?
| | |--- 13=Call display?
||||---1=Name? Not supported
||||---2=Number?
| | | |--- 4=No display?
| | | |--- 5=Name and Number?

||||---0=End?
| | |--- 14=Daylight Saving? Off
| | |--- 15=Auto Dial Timer? 6
|||---16=CFNR Timer? Not supported
| | |--- 17=Hold Ringback Timer? 3
| | |--- 18=Music on hold? On
| | |--- 19=Do Not Disturb? Off
| | |--- 20=Message Waiting? Not supported
| | |--- 21=Hold Ringback? On
| | |--- 22=Conference? Not supported
| | |--- 23=Local Conferencing? Not supported
| | |--- 32=Auto answer? Not supported
| | |--- 33=Beep on auto answer? Not supported
| | |--- 34=Auto reconnect? Not supported
| | |--- 35=Auto Reconnect Beep? Not supported
| | |--- 36=Idle display static?
| | | |--- 1=Cycle/Flash?

||||---2=Static?
||||---0=End?
| | |--- 38=Inactivity timeout?
| | | |--- 1=No timeout?

| | | |--- 2=30 seconds?
| | | |--- 3=1 minute?
| | | |--- 4=2 minutes?
| | | |--- 5=5 minutes?
| | | |--- 6=10 minutes?
| | | |--- 7=15 minutes?
||||---0=End?
| | |--- 39=DSM call view? On
| | |--- 40=USB Keyboard type?
||||---1=English?
||||---2=English US?

||||---3=German?
||||---4=Spanish?
||||---5=Italian?
||||---6=French?
||||---0=End?
| | |--- 43=Deflect Address? Not supported
| | | |--- 01=New/Change Target?
||||---00=End?
| | |--- 44=Line settings?
| | |--- 45=Call view icons? Off
|||---46=Call park? Not supported
| | |--- 47=Call Park Pickup? Not supported
| | |--- 48=Idle dialing mode?
Te l e p h o n e M e n u D e f a u l t