Customizing the Telephone
63
Step by Step
Ringer
The tone sequence can be varied in 3 steps, the melody
in 8 steps. During programming you may switch be-
tween the tone sequence and melody input fields using
the arrow keys
<
and
>
.
Prerequisite: You are in the "Audio Settings" page 61
menu.
> : Select and confirm. The current setting is displayed.
> Use the arrow keys to select the input field for music or
tone sequence.
o etoI Use these keys (1-5) on the keypad to change the values
as required.
: Confirm to change. The new setting is displayed.
Handset Volume
You can adjust the handset volume as follows:
Prerequisite: You are in the "Audio Settings"
page 61.
> : Select and confirm. The current setting is displayed.
The value can be increased or reduced by using either
uv the control keys on the telephone or
<> the arrow keys or
o etol the keypad keys.
: Confirm the setting. The new setting is displayed as a
value.
If configured, the ringing tone may be different
from the settings made here.
3=Ringer? >
Melody 2 Tone sequ. 1
Melody 3 Tone sequ. 2
05=Handset vol.? >
>
To Next Page
Loading...
