Siemens optiPoint 410 S Series - Answering a Call

Operating the Telephone with the optiPoint display module
69
Step by Step
Answering a Call
n You can now lift the handset to speak with the calling
party
or
press the Connection icon in the Caller Box to answer
the call.
The display changes and Caller Box

appears closer
to line

.
Adding Callers to the "Contacts" Phone Book
When you answer a call, usually the caller's number is
displayed as the caller ID ( page 49).
In a HiPath 3000/HiPath 4000 environment, the caller's
name is replaced with the caller's number; therefore,
the caller's number is displayed twice.
You can use any of these details to create a new entry
in the phone book.
Press the Phone Book icon in the Caller Box to open
the phone book. Please refer to the operating instruc-
tions for the optiPoint display module for information on
how to create entries in the phone book.
Using the caller's number you can create a new
entry in your Contacts.
Call Control
Mon 07/03/05 11:34AM

00:24

Bill Smith
987654321
Consult/Transfer