Siemens optiPoint 410 S Series - On-Hook Dialing

Step by Step
Operating the Telephone with the optiPoint display module
76
On-Hook Dialing
o Enter a telephone number using the keypad.
or
Enter the phone number using the display keyboard
(the display keyboard is described in the operating in-
structions for the optiPoint display module).
Press the off-hook icon to dial the phone number.
or
Press the Loudspeaker key to dial the phone number.
or Wait until the Auto Dial Timer has timed out.
The number is dialed.
As soon as the party answers, Call Control switches to
display an active connection.
Call Control
Mon 07/03/05 11:34AM
12345678
Del
/123
Contacts
You can also use telephone numbers that are
stored in Contacts ( page 78), in Redial Last
No. ( page 85) or in a Call Log ( page 86).
Loudspeaker
If you are using a dial plan and have set Hot-Key-
pad (see  page 49), dialing takes place auto-
matically as soon as the character string entered
matches an entry in the dialing plan.