Customizing the Telephone
49
Step by Step
Displaying Icons Instead of Text
If an icon is to be displayed on the optiPoint display mo-
dule instead of message text such as "missed calls" for
example, then activate this option (only with
optiPoint 410/420 .standard S V6.0).
Prerequisite: You are in the "Configuration" menu
page 38.
> : Select and confirm.
: Confirm. Icons appear on the optiPoint display module.
or
: Confirm. Text appears on the optiPoint display module.
The new setting is displayed.
Options for on-hook dialing
You should only change this function if you are using a
dial plan (programmed by administrator). If the function
is activated, you have the choice of two settings:
• Context
•Hot-Keypad
Context is the default setting. When on-hook dialing
with this setting you must either confirm the option "Di-
al", press the loudspeaker key or wait until the Auto Dial
Timer has timed out in order to set up the connection.
If Hot-Keypad has been set, dialing takes place auto-
matically as soon as the character string entered mat-
ches an entry in the dial plan.
Using the "Configuration" menu “ (see page 38).
Context
> : Select and confirm.
: Confirm.
or Hot-Keypad
> : Select and confirm.
45=Call view icons? >
Switch on? >
Switch off? >
48=Idle dialing mode? >
1=Context? >
2=Hot-keypad? >
To Next Page
Loading...
