Operating the Telephone with the Display
23
Step by Step
Holding a Call
You can use this function to put a current call on "hold"
to prevent the party at the other end of the line from
hearing an internal consultation for instance.
Using the Menu
Prerequisite: You are in the middle of a call.
> : Select and confirm.
The call is placed on hold. The held party’s number and
the message "On Hold" appear on the display.
After a configurable time interval, a double tone signal
reminds you that the party is still on hold and the mes-
sage "Still on Hold" appears on the display.
: Confirm this option to resume the held call. You may
now either initiate a consultation call or terminate the
call.
Transferring a Call
You can transfer your current call to another party with
or without consultation.
> : Select and confirm (see also page 30).
o Enter the telephone number of the party to whom the
call is to be transferred.
: Confirm.
The party answers.
s Notify user of call transfer.
> : Select and confirm (you may also simply replace the
handset to connect the parties).
The display indicates that the parties have been con-
nected. Replace the handset.
The "Hold" function must be activated by the ad-
ministrator.
Hold? >
Reconnect? >
Consultation? >
Dial? >
Complete Transfer? >
To Next Page
Loading...
