Step by Step
Customizing the Telephone
54
Resetting Memory to Factory Default Settings
You can use this option to reset the phone settings to
the factory default values.
Open the "Local Functions" menu page 51.
> : Select and confirm.
> : Select and confirm.
> : Select and confirm. All user data has been reset to the
factory default settings.
Assigning Function Keys
The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 features a number of functions which you
can assign to function keys as required.
You will find an overview of the options from
page 114.
The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 is equipped with 12 function keys all of
which are user-programmable on two levels.
Five of these keys are preassigned on the first level.
These keys are listed and illustrated on page 17.
Even these five preassigned keys can be repro-
grammed.
If possible, do not change the Cancel and Shift keys.
These enable you to cancel procedures and/or program
shifted keys.
The optiPoint 420 or
optiPoint self labeling key module provide an elec-
tronic self-labelling function for programming keys.
The programming procedure using the telephone menu
is described below with examples. However, you can
also program keys using the web interface ( page 97).
This menu option only resets user-configurable
data. Settings made by the administrator are not
changed.
4=Memory? >
02=Delivery status? >
Clear? >
To Next Page
Loading...
