EasyManua.ls Logo

Siemens optiPoint 410 S Series - Key Clicks

Siemens optiPoint 410 S Series
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customizing the Telephone
65
Step by Step
Key Clicks
You can decide whether or not to have key clicks to pro-
vide feedback when a key has been pressed. Three vol-
ume levels are available and can be adjusted as indicat-
ed below.
Key clicks are only audible when the phone is in a call
state. You do not hear key clicks when you configuring
the telephone.
Prerequisite: You are in the "Audio Settings" page 61
menu.
> : Select and confirm. The current setting is displayed.
You can increase or decrease this value with:
uv the control keys on the telephone or
<> the arrow keys or
o etog the keypad keys.
: Confirm the setting. The new setting is displayed as a
value.
Please note that the setting for room acoustics is
reset to "1=Normal" if you deactivate the function
keys "2=Echoing" or "3=Muffled".
7=Key click vol.? >

>

Table of Contents

Other manuals for Siemens optiPoint 410 S Series

Related product manuals