Step by Step
Operating the Telephone with the Display
32
Using Auto Dial Timer
Following expiry of a configurable delay interval, auto di-
aling occurs after the last dialed digit is entered. This
can happen in the following circumstances:
• Dialing in idle mode
• Deflecting an incoming call
• Making a consultation call
• Transferring an answered call.
The delay time can be shortened as follows:
• Pressing the
:
key. This is applicable in all scenari-
os.
• Lifting the handset. This is only applicable after pre-
dialing when the phone is idle or if the user has en-
tered the digits for a consultation call and the hand-
set is on hook.
• Pressing the Loudspeaker key. This is only applica-
ble after pre-dialing when the phone is idle and the
loudspeaker LED is off or if the user has entered the
digits for a consultation call and the loudspeaker
LED is off.
If an emergency number has been programmed
by the administrator, the delay time for this num-
ber is reduced to 1 second.
The default setting for the delay time is 6 sec-
onds. If necessary, you can change this value
page 44.
The automatic dialing delay does not function if
you are using a dial plan and have set Hot-Key-
pad (see page 49). Dialing takes place auto-
matically as soon as the character string entered
matches an entry in the dialing plan.
To Next Page
Loading...
