Step by Step
Customizing the Telephone
58
o : Enter or modify name or number and confirm. The rele-
vant key is labelled automatically.
or
> : Select and confirm to retain the existing label.
The phone is now ready to dial with this function key in
the programmed level.
Example 3: Assigning a Number or Name to a
Function Key
You can assign frequently dialed numbers to a function
key. When you press the key, the stored telephone
number is shown in the display, and you can set up the
connection.
> : Select and confirm.
> : Select and confirm.
For programming the first level:
: Confirm. You are prompted to press a key.
Press the function key to be programmed (the associat-
ed LED blinks).
: Confirm.
> : Select and confirm.
o : Enter the telephone number or name to be stored and
confirm.
When programming function keys on an optiPoint 420
or optiPoint self labeling key module the electronic
labeling function Label is displayed with the following
prompt:
: Confirm to adapt the electronic key labeling.
o : Enter or modify name or number and confirm. The rele-
vant key is labelled automatically.
or
> : Select and confirm to keep the existing label.
Continue? >
Selected dialing
If you are using an optiPoint 410 write the num-
ber on the label card page 121.
05=Setup? >
4=Function keys? >
1=Non shifted keys? >
02=Selected dialing? >
Program destination #? >
Change?
Continue? >
To Next Page
Loading...
