General features
12
Siemens Building Technologies
Fire Safety & Security Products 07.2008
5.6 Exit Programming Mode
Programming mode can be cancelled by pressing ‘B’ when red and green LEDs
are flashing together.
5.7 Re-Teachable Distributor Code
The unit is able to be re-taught the distributor code when being in programming
mode. The distributor code and configuration card can be taught in either order.
Configuration and distributor code is saved by pressing B. Default distributor
code is Bewator.
5.8 Re-Teachable Configuration (Card)
The configuration of the reader is able to be taught and re-taught using configura-
tion cards when in programming mode. This can be taught in any order in re-
gards to the distributor coded card.
To Next Page
Loading...
