VPN tunnel between SCALANCE M-800 and security CPs
4.3 Secure VPN tunnel with certificates
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
171
6. For this configuration example, configure the group properties with the following settings:
If you use different parameter settings, it is possible that the two tunnel partners will not
be able to set up a VPN connection between them.
7. Select the menu command "Project" > "Save". Save the security project under the
required name.
The configuration of the tunnel connection is complete. The settings are saved in the
configuration file.
To Next Page
Loading...
Need help?
General
