Siemens SCALANCE M-800 Series User Manual

VPN tunnel between SCALANCE M87x and SINEMA RC Server
5.4 Configuring a remote connection on the M87x
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
195
3. Change to Web browser 1.
– Right click in the input box of "Device ID".
– In the shortcut menu, select the menu command for inserting.
– For "Device Password" enter the password that you configured for access, An:t_010
for M874-1 and An:t_020 for M874-2.
– Enable "Auto Firewall / NAT Rules".
When enabled, the suitable NAT and firewall rules are created automatically.
For "Verification Type" select "Fingerprint".
4. Change to Web browser 2.
– Holding down the left mouse button, select the entry for fingerprint.
– Right-click on the selection and in the shortcut menu, select the copy command.
5. Change to Web browser 1.
– Right click in the input box of "Fingerprint".
– In the shortcut menu, select the menu command for inserting.
– Select "Enable SINEMA RC" and click on "Set Values".

Siemens SCALANCE M-800 Series Specifications

General

Brand	Siemens
Model	SCALANCE M-800 Series
Category	Network Router
Language	English